Cable & Wire Protection

The wide product range offers a comprehensive solution for all types of cable, hose and pipe the mechanical & abrasion protection, noise reduction, electrical insulation, thermal protection, radiant heat protection and electromagnetic shielding. Products are widely used in automobile, railway, telecom, hydraulic heavy machinery, electronic, military
and aerospace field.

Corrugated Tubes

We offer corrugated tubes from Schlemmer, both plastic and metal for various applications, regardless of whether high flexibility or stability is required. Thanks to the great diversity of designs, they are used not only in the automotive industry, but also in various industrial sectors.

Cable & Wire Protection

Corrugated Tubes – Plastic

We offer various materials, depending on the required temperature range, mechanical and chemical resistance. Especially in the plastics segment, you will find a wide variety of profiles, materials and nominal sizes you can adapt individually to your own requirements. You can even procure our Polyflex Gigant in nominal sizes of up to 95mm.

Whether slit, closed or perforated, all our Polyflex tubes are highly resistant to mechanical loads whilst at the same time being flexible and suitable for temperature ranges between -40°C and +260°C.

Do you need a tube that can also be used in the tightest of radii? The flat interior corrugation of our Ultra Flat Wave profile necessitates a large interior area of support and thus offers very good protection from vibration damage. In addition, the UFW profile excels with its high pressure resistance

Cable & Wire Protection

Corrugated Tubes – Metal

Protective, corrugated tubes in metal are available as purely metal tubes or as metal tubes with plastic sheathing. As metal tubes are considerably heavier than plastic tubes and have a smaller bending radius, they are used primarily in the industrial sector.

They show their talents particularly well by covering larger temperature ranges, and by providing reliable EMC protection and mechanical resistance. They are often used as protection for electrical cables or fibre optics, as suction, feed and refrigerant tubes.

Braided Sleeves

The wide product range offers a comprehensive solution for all types of cable, hose and pipe the mechanical & abrasion protection, noise reduction, electrical insulation, thermal protection, radiant heat protection and electromagnetic shielding. Products are widely used in automobile, railway, telecom, hydraulic heavy machinery, electronic, military
and aerospace field.

Polyester expandable sleeving

Polyester expandable sleeving is consists of modified polyester monofilament. It offers lightweight, flame retardant and excellent abrasion resistance. The high expansion ratio allows it could be easily cover through the large cable connectors.
Polyester expandable sleeving is used to protect the automotive rubber hose, wire harnesses against mechanicalabrasion, fire resistance and fluid resistance.

Auto expandable sleeving

Auto  expandable sleeving is made of larger Nylon 6.6 and smaller polyester monofilament mixed braiding, the dual monofilament construction offers durable abrasion resistance and oil resistance in a wide range of industrial applications.
It is lightweight and the expandable structure allows for easy to install over long lengths.
Expandable sleeving is used to cover cables, wire harnesses,tubes, industrial hoses where need extremely anti-abrasion in automotive, railway and panel board field.

PPS braided expandable sleeving

VO PPS braided expandable sleeving is made of PolyPhenylene Sulfide (PPS) monofilament which meet UL94 V-0 standard raw material. It offers high abrasion resistance, chemical resistance, high temperature stability, with low moisture absorption and excellent dimensional stability function.
PPS braided expandable sleeving is widely used in the following fields: automotive, railways, aerospace, telecom
and military where needs high flameretardant and high temperature resistance


Nylon 66 braided expandable sleeving

Nylon expandable sleeving is made of nylon 6.6 monofilament which offers excellent performance of abrasion resistance, it is tough, flexible, light weight and resistant to trapping water, heat and humidity, the open-weave construction enables each size to expand to fit several sizes and shapes
Nylon expandable sleeving is most commonly used to protect wire harnesses, cable assemblies, water hose, aircondition pipes, fluid pipes in automotive, railway, electronic, and telecom industry.


EMI Shielding expandable sleeving

EMI Shielding expandable sleeving is made of tinned copper wire and polyester monofilament mix braiding, It’s specially designed for mechanical wear resistance and anti-electromagnetic for the automotive wire harness. The important feature is that it’s more suitable for operating in the narrow space because of the material’s high flexibility, meanwhile it is much
lighter, softer and cost effective than the normal tinned copper sleeving.
EMI Shielding expandable sleeving is widely used in automotive wire harness field, it can provide wear resistance, EMI
shielding and anti signal interference for the harnesses


Self-closing wrap

Self-closing wrap is a non-expandable sleeving woven from monofilament (weft) and multifilament (warp) polyester yarns. It is lightweight, dustproof, flame retardant, cost-effective and highly abrasion resistance, the split open design allows easy install on the cable harness which has been assembled.
Self-closing wrap is most commonly be used on wire harnesses, cable assemblies, tubes and cables to provide a tough, durable protection in automotive, telecom, automatic equipment, railways and panel boards


Waved self closing wrap

Waved self closing wrap is a new type of self-closing wrap, it consists of special modified monofilament and multifilament yarns. It has excellent abrasion resistance, noise reduction, meanwhile it is very easy for installation and removal.
Waved self closing wrap is widely used on wire harnesses, tubes and hoses providing a tough and durable protection in telecom, railway, automotive, equipments and machines.

Waved self closing wrap

Aluminum foil corrugated conduit

Aluminum foil corrugated conduit is constructed of 3 layers, the middle layer is made of fiberglass yarn braiding, the
inside and outside layer are both covered by aluminum foil. The special design provides excellent long-term heat protection for the rubber hose, wire harness and cables in the high temperature area, engine room.
Aluminum foil corrugated conduit provides heat reflection and heat resistance protection for a wide range of industries and applications, including automotive, railway, engines and transformers.

Aluminum foil corrugated conduit

Aluminum heat reflect fiberglass sleeving

Aluminum heat reflect fiberglass sleeving is special designed by laminating an aluminized metallic heat shield to a
layer of strong and tight braided fiberglass yarn. A special manufacturing process permits the sleeve to boast a virtually seamless and non fraying construction. This aluminized fiberglass sleeve reflects more than 95% of the radiant energy that hits its surface, keeping the underlying cables, hoses and wires cool.
Aluminum heat reflect fiberglass sleeving offers perfect heat reflect and protection for automotive rubber hose, wire harness near engine room with high temperature environment

Aluminum heat reflect fiberglass sleeving


Shrinking tubes

Shrinking Tubes

Shrinking tubes are offered in several materials (polyolefin, PVC, PTFE, FEP, Kynar®, and Viton®), colors and dimensions. The tubes are available with or without hot melt adhesives, and halogen. Even UL-/CSA-approved shrink tubing are available in our product range.

Medium/thick walled heat shrink polyolefin

CFW CFM

Thin walled heat shrink tubing with adhesive polyolefin

CPA104 DERAY-IAKT CPA 300

Thin walled heat shrink polyolefin

CPX50 DERAY-HB CPX 50 CZT 200 CPX55 DERAY-H
CPX100 DERAY-I-CPX 100 DERAY ITW CPX300 DERAY-1 3000
CPX 876DERAY-IGY CPZ201  CPX 876

Heat shrink PVC

CHT DERAY H85 CVN7 DERAY F105

High temperature heat shrinks

CKN 175 DERAY-KY 175 DERAY-KYF 190 DERAY-V 25
DERAY-V 25 TW V25 TW V25TW DERAY-VT 220 DERAY PTFE

Other heat shrinks & sleeves

BEX 100 CBK DERAY SPLICEMELT
CEC  FM100 CCB

 

Let’s get together

We are here to help and answer any question you might have.

Looking for a specific item, need help to design customised solutions to our commercial vechile application? Maybe you just want to know more about us? We look forward to hearing from you.

Please fill out our form, and we’ll get intouch shortly.

You can also find contact information to our offices here, or send us a more detailed enquiry

Related News

Latest news from the field of commercial vehicles

© Copyright - EG Electornics