Encapsulated Products

Different encapsulated product solutions to easily include electronic components into your wire harnesses.

Encapsulated products blade diode

Blade Diode

  • To be fitted in most ATO fuse holders.
  • 2 flat terminals 6.3 mm × 0.8 mm
  • Terminals tin plated
  • Housing material: PA
  • Dimensions (l × w × h): 20.0 mm x 7.0 mm x 22.5 mm (without terminals)
Encapsulated products blade diode

Diode- / Resistor Module 

  • Connection: 1 fl at receptacle 6.3 mm × 0.8 mm and 1 fl at terminal 6.3 mm × 0.8 mm
  • Flat terminals tin plated
  • Housing material: PA
  • Dimensions (l × w × h): 52.0 mm × 14.5 mm × 13.0 mm
  • Lower part alternatively with a bracket for M3-screws
Encapsulated products

Diodes / resistors moulded with connector

  • Water-resistant moulded diode
  • Wire range: 0.75 mm²
  • Colour of moulded body: Black
  • Length of moulded body: 50.0 mm
  • Water-resistant connector, protection class IP67
  • Also available with other connector.
Encapsulated products diode

Diodes / resistors moulded

  • Connection: 1 fl at receptacle 6.3 mm × 0.8 mm and 1 fl at terminal 6.3 mm × 0.8 mm
  • Wire range: 1.5 mm²
  • Colour of moulded body: Black
  • Length of moulded body: 50.0 mm
  • Water-resistant moulded resistor / diode
Encapsulated products

Diodes or resistor “relay” module with screwed terminals

  • To be fitted in most relay holders.
  • Connection: max. 5 fl at terminals 6.3 mm × 0.8 mm and max. 4 fl at terminals 2.8 mm × 0.8 mm (depending on model)
  • Terminals tin plated
  • Diode 1 N 4007: Nominal current 1 A reverse voltage 1.000 V
  • Diode GP 15 M: Nominal current 1,5 A reverse voltage 1.000 V
  • Housing material: PA
  • Dimensions (l × w × h): 26.0 mm × 26.0 mm × 25.0 mm (without terminals)
  • Different configuration of terminals possible
Encapsulated products diode

Ex-Fuse & Component Holder

  • Housing material: PA66-GF30
  • Protection class when connected: IP67 and IP69K acc. to DIN 40050
  • Bayonet socket DIN 72585 A1-2.1 SN K2
  • Turned contacts: ∅ 2.5 mm, tin plated
  • Fuse (1 A / 125 V) acc. to Ex-requirements
  • Version with and without mounting bracket available
  • Application: Fuse protection for the tachograph of ADR-vehicles
  • Also available with other electrical components, e.g. diodes, resistors.
Benefits of 48V Systems for Commercial Vehicles

Benefits of 48V Systems for Commercial Vehicles

There's growing trend towards the adoption of new 48V on-board electrical systems in the automotive industry thanks to its numerous efficiency and performance benefits.
Read More
Proud sponsor of Clear River Racing

Proud sponsor of Clear River Racing

Clear River Racing is a non-profit student project at Karlstad University with the aim of developing and designing a racing car every year, which is put to the test against other universities from around the world.
Read More
Copper MegaVAL 70V

Copper MegaVAL 70V

MTA have launched Copper MegaVAL 70V series! This new heavy duty copperbase fuse protecting big loads. This  70 Volt fuse series ranging from 100-500A with a standard fotprint of 50,8mm
Read More

Let’s get together

We are here to help and answer any question you might have.

Looking for a specific item, need help to design customised solutions to our commercial vechile application? Maybe you just want to know more about us? We look forward to hearing from you.

Please fill out our form, and we’ll get intouch shortly.

You can also find contact information to our offices here, or send us a more detailed enquiry

© Copyright - EG Electornics